Connecting The Projector - Sharp XV-Z7000U Operation Manual

Connecting the Projector

Connecting the Power Cord
Plug the supplied power cord into the AC socket on the back of the projector.
CAUTION
• Make sure you connect the power cord firmly into the AC socket.
Connecting the Projector to Audiovisual Equipment
You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual
equipment.
CAUTION
• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the
equipment being connected.
Connecting a video source (VCR, laser disc player, DTV decoder or DVD player) using the standard video and audio input
OR
Projector
S-VIDEO VIDEO AUDIO INPUT
INPUT INPUT (S-VIDEO, VIDEO INPUT)
L R
E-11
1 Connect one end of the S-video cable to the S-VIDEO
2 To use the built-in audio system, connect the RCA
The S-VIDEO INPUT terminal uses a video signal system
in which the picture is separated into a color and a
luminance signal to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT terminal on
the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use
the composite video output terminal.
2 Audio cable (sold separately)
To audio output terminals
1 Video cable (sold separately)
To video output terminal
OR
1 S-video cable (sold separately)
To S-video output terminal
Power cord
CACCU5013DE01
INPUT terminal, or one end of the video cable to the
VIDEO INPUT terminal on the projector and the video
output terminal on the video source.
connectors to the corresponding AUDIO INPUT (S-
VIDEO, VIDEO INPUT) terminals on the projector and
the audio output terminals on the audiovisual source.
VCR,
Laser disc player,
DTV decoder or
DVD player