Sharp XV-Z7000U Operation Manual page 12

Connecting the Projector
Connecting an audiovisual source (DTV decoder or DVD player) using the RCA input
When connecting this projector to a DVD player or a DTV decoder, select "Component" by using RGB/COMPONENT on
the remote control or the GUI menu. (See page 25.)
Projector
/COMPONENT
RS-232C INPUT 1 AUDIO INPUT
(INPUT 1, 2)
Y P P
B R
Connecting an audiovisual source (DTV decoder or DVD player)
using the 15 pin video and audio input
When connecting this projector to a DVD player or a DTV decoder, select "Component" by using RGB/COMPONENT on
the remote control or the GUI menu. (See page 25.)
Projector
NENT INPUT 2
AUDIO INPUT
(INPUT 1, 2)
P RGB /COMPONENT
R
D-sub/RCA cable (sold separately)
Audio cable (sold separately)
INPUT 2
RGB /COMPONENT
Audio cable (sold separately)
To audio output terminals
RCA component cable (sold separately)
To analog component output terminals
To analog component output terminals
To audio output terminals
1 Connect each RCA connector to the corresponding
INPUT 1/COMPONENT terminals on the projector.
2 Connect the other end of the cable to the corresponding
terminals of a DVD player or DTV decoder.
3 To use the built-in audio system, connect one end of an
audio cable to the AUDIO INPUT (INPUT 1, 2) terminal
on the projector.
Connect the other end to the audio output terminal on
the audiovisual equipment.
• A 3.5 mm minijack to RCA audio cable adaptor may be
necessary.
1 Connect the one end of the D-sub/RCA cable to the
INPUT 2 RGB/COMPONENT port on the projector.
2 Connect the other end of the cable to the corresponding
terminals of a DVD player or DTV decoder.
3 To use the built-in audio system, connect one end of an
audio cable to the AUDIO INPUT (INPUT 1, 2) terminal
on the projector.
Connect the other end to the audio output terminal on
the audiovisual equipment.
• A 3.5 mm minijack to RCA audio cable adaptor may be
necessary.
DTV decoder
or
DVD player
DTV decoder
or
DVD player
E-12