Advertisement
Wiring Procedures
1
Please check if you have all the screws
on the power sockets.
2
Make sure that your power cable is
disconnected from the power supply.
If you're unsure, use a probe or
multimeter.
3
Insert and fasten the live wire
(normally red or brown) and naught
wire (normally blue) into the power
sockets, as shown in Image 1 on the
right. Please do NOT insert the
ground/protection line (normally
yellow and green). Consult your
electrician if you're not sure.
Fastening screws
Image 1
Power sockets
Advertisement
