I - Box - Axxess AX200 Installation & User Manual

www.axxessid.com
Installation & User Guide
All operation commands/database or system changes are stored and can be previewed in
Reports.
i - B O X
A new product introduced along with the
AX200 software; i -BOX provides both
access control security and environmental
monitoring. Each i-BOX includes a built in
temperature, humidity, light and voltage
sensor with 14 ports for plug and play
connections of additional smart sensors,
together with 2 access control ports.
When presenting a card to a reader connected to the i- BOX, the transaction will be recorded,
providing a date and time stamp. Detailed reports of all the transactions can be filtered by single
or a group of doors, employee name, company or department, individual date or date range.
These reports can be printed or exported into a database or spreadsheet for analysis. Just go to
Reports • Environment and select the appropriate criteria.
In addition to the Light/Voltage & Temperature/Humidity sensors placed inside the i-BOX during
manufacturing; there are 16 different types of plug & play smart sensors which can be plug into
one of the 14 ports on the back of the i-BOX. Each sensor can be programmed to take readings
as frequent as 1 every second. Maximum and minimum values could be set for every sensor and
once the reading exceeds the limits an alarm transaction will be generated and displayed on the
main screen, providing the time, date, type of the alarm, I-BOX and the sensor's name. Accurate
reports of all the readings taken by all the sensors could be obtained in Reports • Environment.
These reports can be filtered by a single or a group of locations, sensor's type, name & ID and I-
box Name & ID.
The following table contains the list of all the plug & play smart sensors supplied by Axxess
Identification.
Door Panel Position Sensor
Vibration / Shock Sensor
Temperature Sensor
Temperature & Humidity Sensor
Temperature & Door Contact Sensor
Mains Present Monitoring Sensor
Hot Spot Temperature Sensor
High Level & Door Contact Sensor
Flood Sensor
Smoke & Temperature Detector
Intrusion / Movement PIR
Sounder / Beacon Module
Fan Fail Sensor
Inputs / Output Module
General Input Module
AX200 Installation & User Guide – July 2007
Detects the position of side panels and doors
Detects Vibrations from intrusion attempts
Standard temperature sensor range -20C to +80C
High accuracy temperature, condensation and humidity sensor
Combined standard temperature and door position sensor
Monitors the availability of mains power
Early warning temperature sensing of equipment
Combined light level and door position sensor
Flood sensor with 5 meters of water sensing cable
Combined optical smoke and temperature detector
Detection of people for intrusion or presence
Combined sounder and beacon for audio and visual warning
Fixed temperature alarm for temperature and fan fail sensor
Two general purpose inputs and 1 relay output module
Two volt-free general purpose input module
8 8