Break Glass Wiring Ax200 - Axxess AX200 Installation & User Manual

www.axxessid.com
Installation & User Guide
Door forced / held open alarm settings can be accessed through Main Screen • Access Point •
(Enable) Door Contact.
For more information about these settings please refer to Access Point Configuration • Access
Point Settings on this manual.
Note: Relay No.3 generates a 1 second pulse through the Access Granted connection block,
located at the top of AX200 board. The connection is normally closed and the pulse is generated
once the access is granted through either door.
Diagrams on the following pages illustrate the connections between the AX200 components.
Please note that if you are installing a brand new unit, the Fire Alarm, Break glass & PSU
Monitoring links will not be activated until the first time they are used.

Break glass Wiring AX200

AX100
NO
Power In
C
+12vDC
NC
AX200 Installation & User Guide – July 2007
Breakglass Wiring AX200
Double Pole
Breakglass
1
2
3
Terminal
to lock
1
2
3
1 5
AX200
2A 3A 2A
Breakglass Breakglass
Door 1 Door 2
OUT IN
for monitoring of
breakglass
1A
2A
3A
Function Terminal
Normally Open 1A
Common 2A
Normally Closed 3A
3A C NC
PSU
Monitoring
Volt Free
NC