Controller Status & Control; High Security Mode (Hsm) - Axxess AX200 Installation & User Manual

www.axxessid.com
Installation & User Guide
C o n t r o l l e r S t a t u s & C o n t r o l
Devices connected are highlighted and display the door status in real-time on the main screen.
Doors can be controlled directly from the main screen. Commands can
only be given to controllers online and functionality is greyed out if the
controller is not available online to avoid any uncertainty.
Door open
Normal mode
Door unlocked
High security mode
Deadlock
Clear alarm

High Security Mode (HSM)

This feature allows individual doors to be enabled where standard cards
no longer have access. Only cardholders with the high security mode set
(HSM) have access whilst this feature is enabled. The HSM feature can
be switched on by using a card which has the "set high security" enabled,
four times consecutively at the reader. To change back to the normal
mode use a card with the HSM feature four times consecutively.
AX200 Installation & User Guide – July 2007
Opens the door for a set time e.g. 5 seconds
Standard mode
Door permanently unlocked
Only cardholders with high security mode valid
will have access
Locks door for all cardholders, request to exit is
still active. Please exercise care when using the
feature.
Door reset, door forced, door held open alarm
2 9