Database Integrity Check; Communication Between The Ax200 Software And Controller - Axxess AX200 Installation & User Manual

www.axxessid.com
Installation & User Guide

Database Integrity Check

A mains failure or system crash with an open database normally requires running a separate
application to repair the data. All data in the AX200 database is automatically checked on start up
and repaired if necessary.
At the start-up, the software automatically checks the database version. If the database is too old
and not supported by the new version of software the following transaction will appear on the
screen asking you to check the version of the database.
You can view the version of your database in the Performance Analyzer screen; under Tools •
Enable Optional Software. This problem usually occurs when you manually copy a new database
over the old database in the AX200 folder. That's why we strongly recommend that you use
the restore function only!

Communication between the AX200 Software and Controller

A benefit of the AX200 software is its plug and play ability to detect new devices when they are
installed. The New Device Wizard will automatically detect the controller and its unique device
ID. Follow the on-screen prompt by selecting Add.
The following screen will ask whether you are using PIN codes only, a card reader and a PIN
code or a card reader only. Please select the appropriate radio button for your installation,
followed by Next.
2 7
AX200 Installation & User Guide – July 2007