Door Unlock Mode; Date And Time; On & Offline Operation - Axxess AX200 Installation & User Manual

www.axxessid.com
Installation & User Guide

Door Unlock Mode

This feature can be activated from the PC
or cards with the "set unlock" feature
enabled. Using a card with this feature
twice consecutively at the reader will
permanently unlock the door. To return to
the normal mode, use the card again
twice consecutively. Typical applications
include reception doors during normal
office hours or for goods inward
deliveries.

Date and Time

The date and time formats are obtained
by default from the operating system and
therefore no user intervention is required.
The 12 hour time format is NOT
supported by this application. If you are
using the 12h time format you need to go
to Control Panel • Regional and
Language Options • Regional Options •
Customize... • Time and choose the 24
hour (H) time format. You also need to
make sure that your PC is set to UK time format which is (dd/MM/yyyy).
You can change the date settings in the same window under the Date tab.
On & Offline Operation
The AX software enables the use of on and offline controllers from within the same software
simultaneously. The AX100 controller can also be updated using a portable data transfer unit
(DTU). This allows the use of remote doors or doors not requiring online information to be used
at the same time as doors with real-time online information. This reduces costs substantially with
full control from a single software package.
3 0
AX200 Installation & User Guide – July 2007