Access Point Configuration; Access Point Settings; Access Identity; Access Point Name - Axxess AX200 Installation & User Manual

www.axxessid.com
Installation & User Guide
A c c e s s P o i n t C o n f i g u r a t i o n

Access Point Settings

Access Identity

Every device has a unique "Access Identity" and is given a distinctive "Access Point ID" when
connected to the PC. Each controller has a serial number and this is used to communicate with
the PC. If the identity has been entered manually during a system setup or where controllers are
connected using a DTU, then the replace function should be used when the controllers are
operational.

Access Point Name

Access Point Name is specified by the user and could be changed at any time. The extended
length of the field allows up to 50 characters e.g. Building 1 Section West Door 28 Admin. The
first 20 characters are displayed on the current controller information.
5 6
AX200 Installation & User Guide – July 2007