Step 5: Install Legs
Parts
• Main Unit (from Step 4)
• #12 - Right Leg (Qty. 1)
• #13 - Left Leg (Qty. 1)
Hardware
• #27 - M8 Lock Washer - Black (Qty. 2)
• #28 - M8 Wide Flat Washer (Qty. 2)
• #31 - M8x20 Hex Head Bolt (Qty. 2)
• #32 - Round Cover (Qty. 2)
Tools
• Hex Key
32
13
31
27
28
Assembly
Do steps 5-1 and 5-2 on one side and then again
on the other side.
5-1 Install the Right Leg to the Main Unit with the hardware
shown. Make sure that the upright pivot (B) is closer to
the center of the machine. Make sure the wheels on
each leg align correctly in the Rails.
5-2 Put a Round Cover over the head of each
B
12
Assembly Manual
screw.
12