Step 2: Install Front Stabilizer
Parts
• Rear Stabilizer assembly (from Step 1)
• #1 - Main Frame (Qty. 1)
• #16 - Front Stabilizer (Qty. 1)
Hardware
• #24 - M8 Flat Washer (Qty. 8)
• #25 - M8 Lock Washer (Qty. 8)
• #30 - M8x20 Hex Screw (Qty. 8)
Tools
• Hex Key
Assembly
Figure 2
30
25
24
2-1 Attach the Main Frame to the Front Stabilizer with the
hardware shown.
2-2 Attach the Main Frame to the Rear Stabilizer with the
hardware shown.
2-3 Adjust the 6 Foot Pads (A) under the Stabilizers and
the Transport Handle until they just touch the floor (see
Figure 2a). First, twist the Threaded Foot Pad out and
then lock with the Foot Adjust Nut to keep machine
stable.
24
30 25
Figure 2a
9
Assembly Manual
1
A
16