Kenwood KHC29 Instructions Manual page 9

Should excessive vibration occur when using an
l
attachment, either reduce the speed or stop the
machine and remove some of the contents.
Attachments will be damaged and may cause injury
l
if the interlock mechanism is subjected to excessive
force.
DO NOT process hot ingredients.
l
SCALD RISK: Hot ingredients must be allowed to
l
cool to room temperature before placing in the
food processor bowl, mill, goblet or before blending.
Blender attachment
Never fit the blade unit to the power unit without
l
the blender goblet fitted.
AT282 Important - The skirt on the bottom of the
l
goblet is fitted during manufacture and no attempt
should be made to remove it.
Only operate the blender with the lid in place.
l
Only use the goblet with the blade assembly
l
supplied.
Never run the blender empty.
l
Smoothie recipes – never blend frozen ingredients
l
that have formed a solid mass during freezing;
break it up before adding to the goblet.
Do not process spices such as cloves, dill and cumin
l
seeds as they may damage the plastic parts.
Do not use the blender as a storage container. Keep
l
it empty before and after use.
Never blend more than the maximum marked on
l
the goblet - less for frothy liquids such as milk
shakes.
Food Processor
The knife blade and discs are extremely sharp,
l
handle with care. Always hold by the finger grip at
the top, away from the cutting edge, both when
handling and cleaning.
When slicing/grating do not let the bowl fill up as
l
far as the cutting disc: empty it regularly.
Do not exceed the 'MAX' capacity level on the
l
bowl.
4