Top Controls And Indicators - Sanyo PLV-30 Owner's Manual

TOP CONTROLS AND INDICATORS

MENU BUTTON
Used to open or close
the MENU operation.
(P16, 17)
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P18)
ON – OFF
NORMAL
NORMAL BUTTON
Used to reset to normal
picture adjustment preset
by factory. (P25, 30)
MODE BUTTON
Used to select input source
either Computer or Video.
(P21, 28)
POINT BUTTONS
Used to select an item or
adjust the value in the MENU.
It is also used to pan the
image in DIGITAL ZOOM
mode. (P27)
TELE
MENU
MODE
SELECT BUTTON
Used to execute the item
selected. It is also used
to expand the image in
DIGITAL ZOOM mode.
(P27)
BEFORE OPERATION
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P34)
LAMP
WARNING
READY
REPLACE
TEMP.
LAMP REPLACE INDICATOR
This indicator turns to
yellow when the life of the
projection lamp draws to
an end. (P35)
READY INDICATOR
This indicator lights
green when the projector
is ready to be turned on.
And it flashes green in
Power Management
mode. (P33)
LAMP
LAMP INDICATOR
This indicator is dim
when the projector is
turned on. And bright
when the projector is in
stand-by mode.
15