Zoom Adjustment; Keystone Adjustment - Sanyo PLV-30 Owner's Manual

ZOOM ADJUSTMENT

Turn the ZOOM RING to adjust the projected picture size. Turn
the ring to "WIDE" direction to make the image larger, and turn
to "TELE" direction to make the image smaller.
Turn the FOCUS RING to adjust the projected picture focus.
If the picture has keystone distortion, correct image with KEYSTONE adjustment.
Press the KEYSTONE
1
or select the Keystone on the SCREEN menu. (Refer to page
27, 31.) The message "Keystone" is displayed.
Correct the Keystone distortion by pressing the KEYSTONE
2
/ buttons or the POINT UP/DOWN buttons. Press the
KEYSTONE button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE
the POINT DOWN button to reduce the lower part.
Reduce the upper width with the KEY STONE
button or the POINT UP button.
ADJUSTING THE IMAGE

KEYSTONE ADJUSTMENT

/ buttons on the Remote Control Unit
Keystone
button or
The message disappears after 4 seconds.
Reduce the lower width with the KEY STONE
button or the POINT DOWN button.
BASIC OPERATION
19