Connecting To The Video Equipment - Sanyo PLV-30 Owner's Manual

CONNECTING THE PROJECTOR

CONNECTING TO THE VIDEO EQUIPMENT

Cables used for connection
• Video Cable (RCA x 1 or RCA x 3 )
• S-VIDEO Cable
• Audio Cable (RCA x 2- Mini Plug x 1 (stereo) )
Video Source (example)
Video Cassette Recorder
Use any of VIDEO jack Y-Pb/Cb-Pr/Cr
jacks or S-VIDEO jack.
• When both VIDEO jack and S-
VIDEO jack are connected, the S-
VIDEO jack has priority over the
VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks and
S-VIDEO jack are connected, the Y-
Pb/Cb-Pr/Cr jacks has priority over
the S-VIDEO jack.
External Audio Equipment
Audio Speaker (stereo)
12
( = Cables are not supplied with this projector.)
Video Disc Player
Composite Component
Video Output Video Output
Y Pb/Cb Pr/Cr
Video Cables
(RCA x 1)
VIDEO
VIDEO
RESET
AUDIO OUT
(stereo)
Audio
Cable
R L
Audio Input
Audio Amplifier
Component video output equipment.
(such as DVD player or
high-definition TV source.)
S-VIDEO Output
Video Cables S-VIDEO
(RCA x 3) Cable
Y-Pb/Cb-Pr/Cr S-VIDEO
S – VIDEO
Y – Pb/Cb – Pr/Cr
AV
AUDIO OUT COMPUTER
AUDIO
IN
SERVICE PORT
COMPUTER IN
NOTE :
When connecting the cable, the power cords of
both the projector and the external equipment
should be disconnected from AC outlet. Turn the
projector and peripheral equipment on before the
computer is switched on.
Audio Output
R L
Audio
Cable
(stereo)
AV AUDIO IN
Terminals
of the Projector