Before Operation; Operation Of The Remote Control - Sanyo PLV-30 Owner's Manual

BEFORE OPERATION

OPERATION OF THE REMOTE CONTROL

COMPUTER BUTTON
Used to select COMPUTER
input source. (P21)
VIDEO BUTTON
Used to select VIDEO
source. (P28)
KEYSTONE BUTTONS
Used to correct the
keystone distortion.
(P19, 27, 31)
MENU BUTTON
Used to select MENU
operation. (P16, 17)
SELECT BUTTON
Used to execute the item
selected or to expand the
image in DIGITAL ZOOM
mode. (P27)
NO SHOW BUTTON
Used to turn the picture into
black image. (P20)
AUTO IMAGE BUTTON
Use to operate AUTO
IMAGE function. (P26)
P-TIMER BUTTON
Used to operate P-TIMER
function. (P20)
Remove the battery
1
compartment lid.
Press the latch and
pull it up.
14
VIDEO COMPUTER ON – OFF
KEYSTONE D.ZOOM VOLUME
MENU
SELECT
NO SHOW FREEZE NORMAL MUTE
AUTO
IMAGE P – TIMER
Remote Control Batteries Installation
Slide the batteries into
2
the compartment, and
replace the lid.
Two AA, UM3 or R06 size batteries
For correct polarity (+ and –), be sure
the battery terminals are in contact
with the pins in the compartment.
POWER ON-OFF BUTTON
Used to turn the projector on
or off. (P18)
D.ZOOM BUTTONS
Used to select DIGITAL
ZOOM mode and resize the
image. (P27)
VOLUME BUTTONS
Used to adjust volume. (P20)
POINT BUTTONS
Used to move the pointer on
the MENU, to adjust the item,
or to pan the image in
DIGITAL ZOOM mode.
(P27)
MUTE BUTTON
Used to mute sound.(P20)
NORMAL BUTTON
Used to reset to normal
picture adjustments preset by
the factory. (P25, 30)
FREEZE BUTTON
Used to freeze the picture.
(P20)
To insure safe operation, please observe
the following precautions :
Use (2) AA, UM3 or R06 type batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the Remote Control Unit to
moisture, or heat.
Do not drop the remote control unit.
If batteries have leaked on the remote control,
carefully wipe the case clean and load new
batteries.
Operating Range
Point the remote control toward
the projector (the Remote
Receiver) whenever pressing
the buttons.
Maximum operating range for
the remote control is about
16.4' (5m) and 60° in front of
the projector.
16.4'
(5 m)
60°