Symbols; Safety Warnings - Festool KS 60 E Original Instructions Manual

English
Contents
1 Symbols ....................................................... 20
2 Safety warnings .......................................... 20
3 Intended use ................................................ 23
4 Technical data ............................................. 23
5 Machine features ........................................ 23
6 Commissioning ......................................... 24
7 Settings ........................................................ 25
8 Working with the power tool ...................... 26
9 Service and maintenance ............................ 29
10 Accessories ................................................. 30
11 Environment ............................................... 31
12 General information .................................. 31
1

Symbols

Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and
safety notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not look directly at the light.
Do not dispose of as domestic waste.
Direction of rotation of saw and the
saw blade
Saw blade dimensions
a ... Diameter
b ... Locating bore
Tip or advice
Handling instruction
Safety class II
Disconnect from the power supply!
20
Symbol Significance
Hazardous area! Keep hands away!
Warning: Hot surface!
Risk of pinching fingers and hands!
Danger of injury by free-moving saw
blade
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel-
evant regulations in the UK.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in-
structions, illustrations and specifica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for mitre saws
-
Mitre saws are intended to cut wood or
wood-like products, they cannot be used
with abrasive cut-off wheels for cutting
ferrous material such as bars, rods, studs,
etc. Abrasive dust causes moving parts
such as the lower guard to jam. Sparks
from abrasive cutting will burn the lower
guard, the kerf insert and other plastic
parts.
-
Use clamps to support the workpiece
whenever possible. If supporting the
workpiece by hand, you must always keep
your hand at least 100 mm from either
side of the saw blade. Do not use this saw
to cut pieces that are too small to be se-
curely clamped or held by hand. If your
hand is placed too close to the saw blade,