9040
Users Manual
Determine the Rotary Field Direction
To determine the rotary field direction:
1.
Connect the test probes to the end of the test leads.
2.
Connect the test probes to the three mains phases.
3.
Either the clockwise or counter-clockwise rotary indicator illuminates showing the type
of rotary field direction present.
The rotary indicator lights even if the neutral conductor, N, is connected
instead of L1, L2, or L3. Refer to the back of the 9040 for more information.
The 9040 is powered from the installation under test.
8
XW Warning
Note