Table of Contents
Advertisement
PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS COVER
CAUTION
Do not turn on a projector with lens cover
attached. High temperature from light beam may
damage lens cover and result in fire hazard.
BACK
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
G Do not put a flammable object near this vent.
G Keep rear grills at least 3' (1m) away from
any object, especially heat-sensitive object.
G Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM
AIR INTAKE VENTS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
G Do not cover vent slots.
G Keep bottom clear of any objects.
Obstructions may block cooling air.
SPEAKERS
ADJUSTABLE FEET
INFRARED
REMOTE RECEIVER
LAMP
COVER
MAIN ON / OFF
SWITCH
AIR INTAKE VENT
CARRYING HANDLE
EXHAUST VENT
AIR INTAKE
EXHAUST VENT
POWER CORD
CONNECTOR
VENT
7
Advertisement
Table of Contents
