Table of Contents
Advertisement
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
2
Press POINT DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When original image size is larger
than screen size (1024 x 768), this projector enters "Digital zoom +"
mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message "D. Zoom +" is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when image
is larger than screen size.
A projected image can be also expanded by pressing D.ZOOM L
button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message "D. Zoom –" is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM M
button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
L/M, SELECT, POINT and AUTO PC ADJ. buttons.
COMPUTER INPUT
SCREEN MENU
Move a red frame to function and press
SELECT button.
NOTE
G Picture screen adjustment cannot be operated
when "720p (HDTV)", "1035i (HDTV)", "1080i50
(HDTV)" or "1080i60 (HDTV)" is selected on PC
SYSTEM Menu (P26).
G True and Digital zoom +/- cannot be selected when
"RGB", "480p" or "575p" is selected on PC
SYSTEM Menu (P26).
G This projector cannot display any resolution higher
than 1600 X 1200. If your computer's screen
resolution is higher than 1600 X 1200, reset
resolution to lower before connecting projector.
G Image data in other than XGA (1024 x 768) is
modified to fit screen size in initial mode.
G Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
SCREEN Menu icon
33
Advertisement
Table of Contents
