Select Computer System Manually - Sanyo PLC-XF31/XF31NL Owner's Manual

Multimedia projector

Hide thumbs

Table Of Contents

Table of Contents

COMPUTER INPUT

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer

to "COMPATIBLE COMPUTER SPECIFICATION" on page 27). When selecting Computer, this projector automatically

tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of following messages.

When projector cannot recognize connected signal as PC

Auto

system provided in this projector, Auto PC Adjustment

function operates to adjust projector and message "Auto"

is displayed on SYSTEM Menu icon. (Refer to P28.)

When image is not provided properly, manual adjustment

is required. (Refer to P29 and 30.)

There is no signal input from computer. Make sure

––––

connection of computer and a projector is set correctly.

(Refer to TROUBLESHOOTING on page 47.)

D-VGA, D-SVGA, D-XGA, D-SXGA 1, D-SXGA 2, D-SXGA3 or D-UXGA

When digital computer signal is received on DVI terminal,

above message is displayed on PC SYSTEM Menu icon.

This projector automatically selects PC system among those provided

in this projector and PC system can be also selected manually.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

SYSTEM Menu icon.

Press POINT DOWN button to move a red arrow pointer to

system that you want to set, and then press SELECT button.

AUTOMATIC MULTI-SCAN SYSTEM