Table of Contents
Advertisement
COMPUTER INPUT
DIRECT OPERATION
Select INPUT source by pressing INPUT 1/2 and INPUT 3
buttons on Remote Control Unit.
Select INPUT source by pressing INPUT
Control.
MENU OPERATION
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to select Input and press SELECT
button. Another dialog box INPUT SELECT Menu will appear.
2
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2
Press POINT DOWN button to move a red arrow pointer to Input
1 and then press SELECT button. Source Select Menu will
appear.
3
Move a pointer to either Digital or Analog and then press
SELECT button.
When digital signal is connected on DVI terminal, select
Digital
Digital.
When analog signal is connected on DVI terminal, select
Analog
Analog.
When connect a computer output [5 BNC Type (Red, Green, Blue,
Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HV
and V jacks.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2
Press POINT DOWN button to move a red arrow pointer to Input
2 and then press SELECT button. Source Select Menu will
appear.
3
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to "RGB", and then press SELECT button.
SELECTING INPUT SOURCE
L/M
button on Top
SELECTING COMPUTER SYSTEM
WHEN SELECT INPUT 1 (DVI INPUT TERMINAL )
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
INPUT L/M buttons
INPUT 1/2 button
INPUT 1
INPUT 2
INPUT 3 button
INPUT 3
INPUT Menu icon
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 1 and press SELECT
button.
Input 1
Source Select Menu
Move a pointer to Digital or
Analog and press SELECT
button.
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move a pointer to RGB and
press SELECT button.
INPUT 1
INPUT 2
INPUT 3
25
Advertisement
Table of Contents
