Conditions For Transport, Storage And Operation - REA ScanCheck 3n User Manual

The Windows software "TransWin32" is always included on the CD supplied. This can be installed
on any number of PCs. However, ScanCheck 3n can only be operated with this if the software
option TransWin32 is activated on the device.
Software options can be ordered at a later time and activated with a licence key.
Hardware:

Perspex pressure plate with 82.5 mm cut-out (article 030.107.230)

Perspex pressure plate with 175 mm cut-out (article 030.107.220)

20 mil adapter for using the 20 mil measuring aperture function (article 030.107.175)

Mobile report printer, type TD-GPT-U with 2 rolls of thermal paper (article 030.107.153)

Connection cable for report printer (article 030.107.251)

Power supply unit for report printer (06110065)

Carrying case: Hard shell case with moulded parts for the safe and secure storage of the
device and accessories (article 030.003.900)

As a spare part: EAN/UPC calibrated test card (article 030.007.340 )

GS1 calibrated test standard GS EAN/UPC (art.08300912)
Depending on the order, the device is delivered in packaging made of special cardboard or
in a carrying case that is protected during shipping by a matching outer cardboard box.
The calibration card supplied must be stored in a protected space and handled with care. Every 2
years, it should be replaced by a new one.

1.2 Conditions for transport, storage and operation

The REA ScanCheck 3n is a valuable verifier with high precision optical and electronic assemblies.
When it is not in use, the verifier should always be stored and transported whilst protected in the
original box in the foam insert, or in the optionally available transport case. The foam insert serves
to optimally protect the device parts and further accessories against dust, vibrations and damage.
Operating Manual
REA ScanCheck 3n
V 1.2.0 24/02/2020
Page 10 / 116
REA VERIFIER
Copyright © REA Elektronik