Buttons With Special Functions - REA ScanCheck 3n User Manual


< > button: The space button allows the input of spaces and many further special
characters in the input fields for alphanumeric inputs.
<Print L> button: The function of this button can only be called up if the result of a
measurement is shown in the display. Output takes place in the same way as with
the <Print S> function, although in this case the printout command is for the long
version of the measurement log to a connected report printer, of type TD-GPT-U.
<Scan> button: With this button, the user is able to:
- Start a new bar code measurement, if the device displays the start screen or
an evaluation screen shows a previous measurement.
<0> button:
- Enter the numeric value <0> and further
special characters in the active input field, if the device is in set-up mode.

5.5.2 Buttons with special functions

Positioning aid function with laser beam: Button
Before and during the display of a measurement it is possible to switch on the laser
beam by pressing the <1>
beam is switched on, a code can be positioned precisely and centrally beneath it.
Cancel function with multiple measurements: Button
When device is in multiple measurement mode, it is always possible to cancel the
process by pressing the
of measurements.
Article selection function for article database: Button
(can only be used together with the "article database32" option
Operating Manual
REA ScanCheck 3n
V 1.2.0 24/02/2020
button, without starting a measurement. When the laser
<3> button, without having to complete the specified number
Page 69 / 116
REA
<1>
<3>
<5>
VERIFIER
Copyright © REA Elektronik