Screen Setup for HDMI, S-Video, regular audio/video inputs and analog TV
Customizing the Picture
Press MENU to display the menu main page.
repeatedly to select
Press OK or
to access the submenu.
Within the menu, use
Press OK or
button to confirm, enter sub-menu or toggle
the settings of the selected menu item.
Press EXIT button to exit.
To still the picture
Press the FREEZE button to hold on the image on the screen (the video sources are still operating). Press the
button again to reactivate the image.
For the sake of protecting the screen, please do NOT still a picture for a long time.
Selects a desired picture mode.
Adjusts image contrast.
Adjusts screen brightness for easier
viewing of dark picture such as night
scenes and black hair.
Adjusts color saturation.
Adjusts image sharpness and displays a
Selects screen aspect ratio.
Reduces noise (snow) in the picture.
Adjusts tint for image.
Selects one of three automatic color
adjustments. Sets to warm to enhance
hotter colors such as red, or set to cool to
see less intense colors with more blue.
Selects 3D comb filter on/off, normally
please select On.
The OSD illustration shown above is Video
menu in RF(TV) mode.
The menu items may be different when the unit
works in different mode.
Note: you may directly press PICTURE button on the
remote control to select.
Note: you may directly press ZOOM button on the
remote control to select. 'Wide" & "Cinema" stretch the
image in the width to fill the screen of a 4:3 program.
"Wide" is uniform across the screen. "Cinema"
minimizes the effect in the centre, increases at the
edges. "Zoom" increases the size without stretching but
some top and bottom content on 4:3 program is lost.
Advanced Video Menu