Remote Control - Sanyo 263 Instruction Manual

Remote Control

1
2
3
4
6
7
9
10
12
14
15
MTS/SAP
ZOOM CCD
21
LIST FAVORITE AUDIO
PIP
P.POSITION SWAP
Press once to access the Composite 1 ;
Press once to access the HDMI1 mode;
Note: The above button functional list is
Note: The above buttons without descriptions are not active.
Identification of Controls
1. POWER
Turn the unit on or off
2. To select additional products to be controlled with remote control
Note: This remote control is an universal remote control. If your
remote control does not work correctly when you operate the
unit, please try to press TV button.
3. Direct channel selector/number buttons
Use these number buttons to select channel or input password.
4. INPUT
To quickly select input source
5. Dash(-)
5
used to enter a program number for multiple program channels such as 2-
1,2-2, etc.
8
6. RETURN
To quickly return to the previous channel
7. CH+/-
To select channels upward or downward
11
8. VOL+/-
Used to adjust volume.
9. MUTE
Sound mute
10. MENU
13
To access the Menu main page
11. INFO
To display channel status or signal information
12. Menu navigation button:
16
17
SLEEP
18
PICTURE
19
OK button: To confirm or toggle between the settings of the selected
20
FREEZE
13. EXIT
Used to exit the menu
14. ZOOM
To select screen aspect ratio
15. MTS/SAP
To select STEREO, SAP or MONO
16. CCD
To select closed caption mode
17. SLEEP
To set Sleep timer
18. PICTURE
To select the picture mode
19. AUDIO
To select the sound mode
20. FREEZE
To freeze current picture
21. LIST
To quickly access the Channel List menu
(continued)
: To move upward or downward in menu operation;
: To move left or right in menu operation;
To adjust selected menu item in menu operation;
menu item.
9