Thank you for choosing SANYO. Please read all instructions to obtain maximum benefit of your product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, D O N O T R E M O V E C O V E R ( O R B A C K ) . N O U S E R - SERVICEABLE PARTS INSIDE.
NEVER spray liquids on the screen. ® Partner, Sanyo Electric co., Ltd. has determined that this ® guidelines for energy efficiency.” HANDLING PRECAUTIONS • Handle by the cabinet only. Never touch the screen when handling.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..2 FCC INFORMATION ...3 ® ENERGY STAR USER INFORMATION .3 TRADEMARKS ...3 PROTECTING THE LCD SCREEN ...3 HANDLING PRECAUTIONS ...3 INSTALLING AND UNINSTALLING STAND ...5 INSTALLATION ...6 POSITIONING THE LCD HDTV ...6 WALL MOUNTING (OPTIONAL) ...6 GETTING STARTED ...7 PReCAUTIONS ...7 GETTING STARTED-CONTROLS AND...
INSTALLING AND UNINSTALLING STAND • When holding (moving or lifting) the LCD Display, hold the display’s body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage. • Before installing, provide a desk (or a part of it) which is strong enough to support the weight of the LCD TV and its stand.
INSTALLATION POSITIONING THE LCD HDTV Always use a firm-flat surface when positioning your HDTV. Do not position the unit in a confined area. Allow adequate space for proper ventilation. 52.3 29.3 NOTE: All dimensions are in inches. Diagonal screen: 54.6 inches WALL MOUNTING (OPTIONAL) Use the screws that are threaded into the stand-...
GETTING STARTED Install batteries in the Remote. PRECAUTIONS Do not use rechargeables together with dry cells, other types, mixed new and old or batteries with different charge levels. Do not expose the Remote or batteries to moisture or heat such as sunshine. (the size of battery is AAA).
GETTING STARTED-CONTROLS AND JACKS LEFT-SIDE Input / OK button COMPOSITE VIDEO INPUT VIDEO1, PAGE 10 - Standard (composite) video and audio inputs while using video devices with analog audio and composite video output.Connect digital video equipment to the Video Yellow jack, and matching Audio White (L) and Red (R) jacks.
REMOTE CONTROL OPERATION MUTE Button- Press to mute or restore the sound. Numeric Buttons- Press numeric buttons to select a channel. Example: Press 6 then OK button to select analog channel A6. Press 6 then 1-- button to select digital channel D6.
GETTING STARTED-CONNECTIONS Analog Signal Connections - VIDEO1 or VIDEO2 (Shared with Component-Y). Connect an analog device such as an Analog Cable Box, Satellite Receiver or VCR. Composite connectors are included on your HDTV to provide continued compatibility with older analog devices such as a VCR.
GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH POWER CONNECTION Plug in AC power cord (120V AC, 60Hz) Press the POWER button, (Follow the on-screen instructions). To 120V AC outlet. INITIAL SETUP Use the CURSOR ▲ and ▼ buttons to highlight Store or Home. Press the OK button. TVs will enter INITIAL CHANNEL SCAN automatically.
ADVANCED AV CONNECTIONS ADVANCED DIGITAL SIGNAL CONNECTIONS-HDMI TO HDMI Connect compatible Digital devices such as a HD Cable Box, HD Satellite Receiver, DVD Player, and Game System. HDMI-High-Definition Multimedia Interface. This is a digital AV interface that accepts uncompressed video signals for the best picture quality possible. It supports HDCP copy protection and allows transmission of copy-protected digital content.
PC CONNECTIONS NOTE: Before connecting any cables, disconnect the AC Power Cords of both the HDTV and Personal Computer from the AC outlets. Connect a RGB cable from the monitor output on your PC to the RGB connector on the HDTV and tighten the screws.
SPORTS MODE “ By simply pressing the SPORTS remote control, the TV will automatically optimize both picture and sound settings for the programs shown. ■ ■ Football − For golf, football programs etc. − Fresh greenness of the lawn − Enfolding cheering voices, ball hitting sounds ■...
ON-SCREEN MENU OPERATION MENU NAVIGATION MAP MAIN MENU SUB-MENU OPTIONS CHANNEL ADJUSTMENT SIGNAL SOURCE OPERATION There are two categories: ● ● Cable AIR(Antenna) Search: It will search for analog and digital channels that are broadcasted over-the-air. Cable Search: It looks for analog cable channels and unscrambled (Clear QAM) digital cable channels.
ON-SCREEN MENU OPERATION (CONTINUED) CHANNEL LIST OPERATION The Channel List is a database of active channels you can scan through using the CURSOR ▲ and ▼ buttons. Customize it by deleting or adding channels. Press the MENU button on the remote control to display the Main menu.
ON-SCREEN MENU OPERATION (CONTINUED) PARENT ADJUSTMENT This SANYO television is equipped with an electronic V-Chip to interpret MPAA (Motion Picture Association of America) and TV Parental Guidelines rating codes. When these codes are detected, the HDTV will automatically display or block the program, depending upon choices you make when setting up the PARENT menu.
ON-SCREEN MENU OPERATION (CONTINUED) MPAA OPERATION MPAA- Decides which kind of classified movie rating signal can be viewed. Press the MENU button and then use the CURSOR ◄ and ► buttons to highlight PARENT. Press the OK button. Enter your password. If the password is correct, it will automatically return to the PARENT menu.
PICTURE/ AUDIO/ ADVANCED ADJUSTMENT PICTURE ADJUSTING THE PICTURE LEVELS PICTURE MODE OPERATION Press the MENU button on the remote control to display the Main menu. Use the CURSOR ◄ and ► buttons to highlight PICTURE. Press the OK button. Use the CURSOR ▲ and ▼ buttons to select the Picture Mode. Press the OK button. Use the CURSOR ▲ and ▼ buttons to select the Cinema, Standard, Vivid or User.
ADJUSTING THE AUDIO LEVELS TREBLE/ BASS/ BALANCE OPERATION Press the MENU button on the remote control to display the Main menu. Use the CURSOR ◄ and ► buttons to highlight AUDIO. Press the OK button. Use the CURSOR ▲ and ▼ buttons to select Treble, Bass or Balance. Press the OK button. Use the CURSOR ◄ and ► buttons to adjust the audio setting.
signals usually will not need noise reduction. MPEG NR OPERATION Press the MENU button on the remote control to display the Main menu. Use the CURSOR ◄ and ► buttons to highlight ADVANCED. Press the OK button. Use the CURSOR ▲ and ▼ buttons to select MPEG NR. Press the OK button. Use the CURSOR ▲ and ▼ buttons to select Off, Weak, Medium or Strong.
NOTES : • When you select to PC source or USB mode, the120Hz CONDITION default setting is set to Off. • When display happened double shadow or Outer Glow ,please turn off the 120Hz CONDITION. RESET ADVANCED OPERATION Reset Advanced- Reset the previous adjustment settings under the ADVANCED mode to the factory default value.
Use the CURSOR ▲ and ▼ buttons to highlight Current Time. Use the CURSOR◄ and ► buttons to select hour.Press the OK button. Use the CURSOR◄ and ► buttons to select minutes.Press the OK button. On Time Function- turn on Switch on Time function Press the MENU button on the remote control to display the Main menu.
CC STYLE SETTING OPERATION CC Style Setting- Caption is a textual information transmitted along with the picture and sound. Turning captioning ON causes the HDTV to open these captions (Digital or Analog) and superimpose them on the screen (Local broadcasters decide which caption signals to transmit).
USB PHOTO VIEWER MEDIA BROWSER OPERATION Press the INPUT button on the remote control and use the CURSOR ▲ and ▼ buttons to highlight USB. Press the OK button. Use the CURSOR ▲ and ▼ buttons to highlight Media Browser. Press the OK button. Use the CURSOR ▲...
Use the EXIT button to exit this function. SETTINGS (for Slideshow function) OPERATION Use the CURSOR ▲ and ▼ buttons to highlight Settings. Press the OK button. Use the CURSOR ▲ and ▼ buttons to highlight Slideshow Interval. Use the CURSOR ◄ and ► buttons to select 3sec, 5sec or 10sec. Use the CURSOR ▲ and ▼ buttons to highlight Slideshow Effect.
• Do not use a USB Hub. • You must obtain any required permission from copyright owners to use copyright content. SANYO cannot and does not grant such permission.Imusam earume doluptaspid quiat que eos et hillignam abo. Ut quiassition reni beaqui ducit,...
HELPFUL HINTS - Problems / Solutions If you are having problems with your HDTV, check this trouble shooting chart to find one or more possible solutions. Problem: Check these Conditions: • Check the antenna / external connections. • There may be a station trouble, no No picture, sound signal broadcast.
Maximum Visible Range (H)1209.6 x (V)680.4 mm (54.6" class /138.8 diagonal) Refresh Rate 120 Hz Picture Resolution Full HD 1920X1080 Viewing Angle Horizontal 178° & Vertical: 178° (Panel tentative) Brightness 450(Typical) cd/m (Panel tentative) Contrast Ratio 5000:1 (Typical) (Panel tentative) Voltage 120V AC 60Hz AC Power Consumption (average)
Output terminals Digital Audio Output Audio Output CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with a VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. PC / HDMI SIGNAL MODES This LCD TV can correspond to the signals below.