Memorizing The Channels - Sanyo 263 Instruction Manual

This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.
Selecting the Tuning Band
Before your TV can memorize the available channels, you must specify the type of signal source that is connected
to the unit. (i.e., an antenna or cable system)
1
Press MENU to display the menu main page.
2 Press or repeatedly to select
Press OK or to access the submenu.
3
4
Press or to select
5
Press OK or to select the Tuning Band.
Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.
If using antenna, select Air;
If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area's cable
system. Normally please select Cable Auto. (For further band information, contact your cable service
provider.)
Auto Channel Search
Navigate to the Setup sub-menu and highlight Auto Ch Search.
1
Press OK or to begin the auto channel search.
2
The unit will automatically search for all available TV/DTV (if
using antenna), CATV/CADTV (if using cable) program.
Note: if you want to stop the auto-search, press EXIT button.
Digital (CADTV) cable systems may cause several
unviewable channels to be memorized.
Add On Channel Search
After initial auto channel search, you can make use of Add On
Channel Search option to search for new programs and add them to
1
Navigate to the Setup sub-menu and highlight Add On Ch
Press OK or to begin the a
2
The unit will automatically search for new programs and add them
to the program list.
Note: If you want to stop the search, press EXIT button.
Manual Channel Set
After setting channels into memory, you can add or delete channels
from the default channel list as follows:
1
Navigate to the Setup sub-menu and highlight Manual Ch Set.
2
Press OK or to open Manual Channel Set Menu sub-menu.
or
3
Use button
to add or delete the channel.
4
Press EXIT button to exit.
Now when you use CH+/- buttons to cycle among the channels,
the deleted channels can not be selected.

Memorizing the Channels

Setup menu.
Tuning Band item .
dd on channel search.
to select a channel, then press the OK button
Video
Audio
Setup
Feature
Video
Audio
Setup
Feature
Autoprogram Menu
Channel 12
Channels Found
Progress (%)
Video
Audio
Setup
Feature
Video
Audio
Setup
Feature
15
Tuning Band
Air
DTV Signal
Auto Ch Search
Add On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit
Tuning Band
Air
DTV Signal
Auto Ch Search
Add On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit
Found
7
Tuning Band
Air
DTV Signal
Auto Ch Search
Add On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit
Tuning Band
Air
DTV Signal
Auto Ch Search
Add On Ch Search Auto On Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit
To Exit
To Exit
3
To Exit
To Exit