74 | DR 18M, DR 24M | Remarks for HF-emission and immunity
Electromagnetic emissions
This DR Detector has been tested for the electromagnetic environment as
described below.
The user of the DR Detector should ensure that it is used in such an
environment.
Nevertheless the HF-emission and immunity can be influenced by connected
data cables depending on length and the manner of installation.
Emissions test
RF emissions in
accordance with
CISPR 11
RF emissions in
accordance with
CISPR 11
Harmonic emissions
in accordance with
CISPR 11
Voltage
fluctuations / flicker
emissions in
accordance with
CISPR 11
0380A EN 20180703 1429
Compliance Electromagnetic Environment
Guidelines
Group 1
This DR Detector uses RF energy only
for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any
interference in nearby electronic
equipment.
Class A
The DR Detector is suitable not only in
non-household facilities but can also be
used by directly connecting it to the
common low-power network in a
Complies
building.
Class A
Complies