LawnMaster GT1454 Operator's Manual page 12

ASSEMBLY
PREPARING THE TRIMMER FOR USE
NOTE:
Use only approved outdoor extension cords.
1. Attach the outlet end of an extension cord to the plug on the rear of the grass trimmer.
2. Route the extension cord through the slot located on the rear of the grass trimmer housing and
place underneath the cord retainer.
3. To start the grass trimmer, press the on/off switch.
4. To stop the grass trimmer, release the on/off switch (Fig. 9).
WARNING
If any parts are damaged or missing, do not operate this product until the
parts are replaced. Failure to heed this warning could result in serious
personal injury.
WARNING
Do not connect to power supply until assembly is complete.
Failure to comply could result in accidental starting and possible serious
personal injury.
WARNING
Never attempt to lock the on/off switch in the ON position.
12
Fig.9