Accessories; Disinfect The Somnovent Cr - Weinmann SOMNOvent CR Manual

6.5 Accessories

For cleaning the exhalation system, the breathing mask, the headgear/headband, the
bacteria filter and the respiratory humidifier SOMNOclick 300, see the chapter entitled
"Cleaning" in the relevant instructions for use.

6.6 Disinfect the SOMNOvent CR

If required, e.g. following infectious diseases or unusual contamination, you can also
disinfect the housing, the power cord and the breathing tube. See the instructions for use
for the disinfectant to be used. It is recommended that suitable gloves (e.g. household or
disposable gloves) are used for disinfecting.
Device
For disinfecting by wiping, we recommend terralin
Warning! Risk of electric shock!
• Before cleaning, it is essential to pull the power cord out of the power
connection and the power supply plug out of the socket.
• Ensure that no liquids get into the device. Never immerse the device in
disinfectants or other liquids, otherwise this can result in damage to the
device and thus a hazard to users and patients.
Caution!
Ensure that no liquids get into the device through the pressure measuring connector,
otherwise there may be malfunctions.
The housing and the power cord of the SOMNOvent CR are cleaned simply by wiping with
disinfectant.
Breathing tube
For disinfecting by immersion, we recommend gigasept
When disinfecting, proceed in just the same way as when cleaning.
Caution!
The breathing tube may not be heated above 70 °C. It may not be sterilized.
EN
32 Hygiene treatment
®
protect as a disinfectant.
®
FF as a disinfectant.