Advertisement
Quick Links
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***
MODEL#97800
WINE RACK
DIMENSIONS
Width - 18.31"
Depth - 15.87"
Height - 67.87"
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Acme Furniture 97800
Summary of Contents for Acme Furniture 97800
- Page 1 ASSEMBLY INSTRUCTION FOR ACME FURNITURE MODEL#97800 Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
-
Page 2: Parts List
97800 PARTS LIST Top frame Drawer head Left side Drawer Left Bottom frame Right side Drawer Right Connecting iron Layer frame Bottom Drawer back Layer Drawer bottom Top layer Back... -
Page 3: Hardware List
HARDWARE LIST Cam bolt 7*35*12.5mm Bolt 2*1-1/8" Bolt Cam lock 15*12mm 2*1-5/16" Fixative plate Dowel 8*30mm Wood screw 8#*1-1/4" Wood screw 3*19mm Slide rail 17*310mm Adjustable leveler 24mm*1/4*12mm Wood screw #6*1/2" Wall mounted strap 25*152mm Fixing screw M4*12mm Wood screw 4*16mm Wine glass rack Wall anchor... - Page 4 ASSEMBLY INSTRUCTIONS Step 1.
- Page 5 ASSEMBLY INSTRUCTIONS Step 2. Insert in as arrow direction to specify...
- Page 6 ASSEMBLY INSTRUCTIONS Step 3.
- Page 7 ASSEMBLY INSTRUCTIONS Step 4.
- Page 8 ASSEMBLY INSTRUCTIONS Step 5.
- Page 9 ASSEMBLY INSTRUCTIONS Step 6.
- Page 10 ASSEMBLY INSTRUCTIONS Step 7. Step 8.
- Page 11 ASSEMBLY INSTRUCTIONS Step 9. Extend the two outer slides of the runners so that they could align with the sides of the drawer. Make sure the pre-drilled holes from the drawer align with the screw holes of the outer slides. Secure two screws from the inside of the drawer using a Phillips screwdriver to tighten them to the outer slides.
- Page 12 ASSEMBLY INSTRUCTIONS Step 10. Wall For safety,please use the strap to secure the uniton the wall. ASSEMBLY IS COMPLETED. Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.
Need help?
Do you have a question about the 97800 and is the answer not in the manual?
Questions and answers