Boot; Save & Exit - DFI RNO171 User Manual

X Boot
Aptio Setup - American Megatrends International, LLC.
Main Advanced Chipset Security

Boot

Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [Off]
Quiet Boot [Enabled]
Boot Option Priorities
Version 2.21.1277. Copyright (C) 2021 American Megatrends, Inc.
Setup Prompt Timeout
Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF) denotes indefi-
nite waiting.
Bootup NumLock State
Select the keyboard NumLock state: On or Off.
Quiet Boot
This section is used to enable or disable quiet boot option.
Boot Option Priorities
Rearrange the system boot order of available boot devices.
User's Manual | RNO171
Save & Exit
The number of seconds
that the firmware will wait
before booting the original
default boot selection.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
X Save & Exit
Aptio Setup - American Megatrends International, LLC.
Main Advanced Chipset Security Boot
Save Options
Save Changes and Reset
Discard Changes and Reset
Default Options
Restore Defaults
Boot Override
Version 2.21.1277. Copyright (C) 2021 American Megatrends, Inc.
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will appear. Select
Yes to reset the system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will appear. Se-
lect Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press <Enter>. A dia-
log box will appear. Select Yes to restore the default values of all the setup options.
Boot Override
Move the cursor to an available boot device and press Enter, and then the system will immedi-
ately boot from the selected boot device. The Boot Override function will only be effective for
the current boot. The "Boot Option Priorities" configured in the Boot menu will not be changed.
Chapter 3
BIOS SETTINGS
Save & Exit
R e s e t t h e s y s t e m a f t e r
saving the changes
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
42