Device Description; First Start-Up - Tech Controllers EU-WiFi OT User Manual

II. DEVICE DESCRIPTION
The regulator is intended for controlling the heating device.
zone by sending a signal to the heating device when the zone needs heating to reach the desired temperature
Controller functions:

Built-in temperature sensor

Built-in WiFi module

Possibility of setting a weekly operation schedule

Controlling room temperature with the use of pre-configured heating curve
It is also possible to control the heating system via a web app
III. FIRST START-UP
It is necessary to follow these steps while starting the controller for the first time so that the controller works properly:
1. Configure the internet connection
2. Configure the wired external sensor
3. Configure the external sensor (optional)
4. Configure the room sensors / room regulators
Its main task is to maintain the pre-set temperature in the
https://emodul.eu .
5
.