Wifi Network Selection; Configure Network; Settings; Time Settings - Tech Controllers EU-WiFi OT User Manual

4.2. WIFI NETWORK SELEC TION
This submenu presents a list of available networks. Select the network and confirm by pressing MENU. If the network is
secured, it is necessary to enter the password. Use + and – to select each letter of the password and press EXIT to complete
the procedure.
4.3.

CONFIGURE NETWORK

Normally, the network is configured automatically. The user may also conduct it manually using the following parameters
of this submenu: DHCP, IP address, Subnet mask, Gate address, DNS address and MAC address.
5.

SETTINGS

5.1.

TIME SETTINGS

The controller downloads current time and date from the network. The user may set the time and date manually.
5.2.

SCREEN SETTINGS

Parameters available in this submenu enable the user to customize the main screen view. It is possible to select the
parameters to be displayed.
The user may also adjust the display contrast as well as the screen brightness. Screen blanking function enables the user
to adjust the brightness of a blank screen. Screen blanking time defines the time of inactivity after which the screen goes
blank.
5.3.

LANGUAGE SELECTION

This function enables the user to choose the language version.
6.

FACTORY SETTINGS

This function is used to restore factory settings of the parameters in the main menu (excluding the service menu).
7.

SOFTWARE VERSION

This function is used to view the software version
8.

SERVICE MENU

Functions available in the service menu should be configured only by qualified fitters and access to this menu is secured
with a code.
.
13