Controller Functions; Main Menu; Day Of The Week - Tech Controllers EU-T-4.1 User Manual

USER MANUAL
Clock settings
Day from...
Night from...
Channel selection
Optimum start / heating/cooling mode
selection (in service menu)
Service menu

4. CONTROLLER FUNCTIONS

The user navigates the menu structure using all the buttons. In order to edit particular parameters, press and hold MENU.
Next, press to view the controller functions – the edited parameter is flashing whereas the remaining parameters are
not displayed. Use plus and minus buttons (+ - ) to change the parameter settings. Press
move on to edit the next parameter or press and
press and hold MENU to confirm and return to the main screen view - apart from editing weekly control settings and
channel selection.
4.1.

MAIN MENU

4.2.

DAY OF THE WEEK

After entering the main menu, all icons which are not connected with the parameter
which is being edited are not displayed. The first parameter is day of the week.
Press + or - until the current day of the week appears on the screen. Press
confirm and move on to the next parameter or press and hold MENU to confirm and
return to the main screen view.
Parameter icons:
Weekly control settings
Comfort temperature
Economical temperature
Hysteresis
Temperature sensor calibration
to confirm the changes and return to the previous parameter or
Day of the week
Clock
Day from...
Night from...
Optimum start
Service menu
Weekly program
Pre-set comfort temperature
Pre-set economical temperature
Hysteresis
Calibration
13
to confirm the changes and
to