Protections; Heating Circuit; Type Of Control - Tech Controllers EU-2801 WiFi User Manual

7.

PROTECTIONS

This function enables the user to activate and deactivate the auto-lock.
When auto-lock is active, it is necessary to enter PIN code in order to
access the controller menu.
NOTE
Default PIN code is „0000".
8.

HEATING CIRCUIT

* Displayed when the <Constant temperature> function is activated
** Displayed when the <Weather> function is enabled
8.1.

TYPE OF CONTROL


Constant temperature – when this option is active, the user may edit the parameters available in the <Settings>
submenu.
Settings - this function is used to define the pre-set CH boiler temperature without the use of external sensor.
The user may set desired temperature of the CH boiler. The boiler remains active in the periods defined in the
Weekly schedule. Outside these periods the device does not work. Additionally, when the thermostat function
has been activated, the CH boiler is damped when the pre-set room temperature has been reached (when the
thermostat function is switched off, reaching the pre-set room temperature will result in decreasing the pre-set
CH boiler temperature). The room will be heated to reach the pre-set temperature in the periods defined in the
Weekly schedule.
Type of control
Pre-set room
temperature
Reduced pre-set
room temperature
Minimum supply
temperature
Maximum supply
temperature
Constant
temperature
Weather
Settings
11
Pre-set boiler
temperature*
Heating curve**
Heating reduction
Active room
thermostat
Room sensor
influence