• After positioning the manifold (j), as shown in
• Depois de posicionar o coletor (j), conforme
• Después de colocar el colector (j), como se
the figure, slide the upper mount bar (e) down
mostrado na figura, deslizar para baixo a barra
muestra en la figura, deslice hacia abajo la barra
until it touches the manifold itself. At the end,
de suporte superior (e) até entrar em contacto
de soporte superior (e) hasta que toque con el
tighten the nuts used to assemble both bars (e).
com o coletor. No final, apertar as porcas usadas
colector. Cuando termine apriete las tuercas
para montar ambas as barras (e).
para montar ambas barras (e).
e
18
N.B.: do not handle the manifold (j) gripping
N.B.: não manusear o coletor (j) pegando-o
Nota: No maneje el colector (j) tomándolo por
it by the copper fittings.
pelas conexões de cobre.
los racores de cobre.
j
18
e
17
11 16
j
e
18
j
e
11 17
1-14