RP5-GM32
Programming Button and Adjustment Dial Functions
You can press and hold the programming button on the side of the interface to access different programming modes. Once the
LED is lit to the mode you desire (see below for modes), immediately release the programming button to access that mode.
PLEASE NOTE:
• This process must be done with the interface in the vehicle and the key in the ignition position.
A. LED 1 flash green: SWC re-assignment. This allows you to re-assign the SWC functions to the buttons of your
choice. Please see the Optional Steering Wheel Control Programming instructions on Page 4 for more details.
B. LED 1 flash red: Master reset. This does a master reset of the interface and restores the following settings to factory
defaults:
•
SWC Mapping
•
SWC Calibration
Default Steering Wheel Control Programming
Default SWC Button Assignments
Volume +
Volume -
Source
Track +
Track -
Voice
Play/Pause
Optional Steering Wheel Control Programming
Factory Mode
•
The SWC Mute / Voice buttons are programmed to control
OnStar. They cannot be programmed for short press / long
press dual command functionality and are blocked from
doing so.
Pacific Accessory Corporation
Alpine
JVC
Volume +
Volume +
Volume -
Volume -
Source
Source
Track +
Track +
Track -
Track -
Mute
Mute
Preset +
Preset/Disc -
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
Steering Wheel Control and Telematics Retention
Kenwood
Clarion
Volume +
Volume +
Volume -
Volume -
Source
Source
Track +
Search +
Track -
Search -
Mute
Mute
Disc/FM+
Band
•
OnStar control through the SWC Mute button is disabled.
This will free up the Mute button to send mute radio
command and a second function.
PAC-audio.com
Radio Replacement Interface with
For select General Motors Vehicles
With 29 Bit Data Systems
Pioneer
Sony
Volume +
Volume +
Volume -
Volume -
Source
Source
Track +
Track +
Track -
Track -
Mute
Mute
Preset +
Preset +
Aftermarket Mode
Rev: V1
Date:
12/17/2021
Fusion
Volume +
Volume -
Source
Track +
Track -
Mute
Audio
Page 3
Need help?
Do you have a question about the RP5-GM32 and is the answer not in the manual?