Advanced amplifier interface for chrysler / dodge / jeep / ram (7 pages)
Summary of Contents for PAC RSIC-SI-CRC EZ
Page 1
SHIPPED FULLY ASSSEMBLED AND CALIBRATED PAC International, Inc. Tel: (866) 774-2100 Technical: (866) 649-2710 Web Site: www.pac-intl.com PAC International, LLC. All Rights Reserved. • (866) 774-2100 • Fax (866) 649-2710 RSIC® is a registered Trade Mark of PAC International, LLC.
Page 2
RSIC-SI-CRC EZ to Wood: #8 x 1-5/8 inch minimum size coarse thread screw. (Recommended #12 or #10 x 1-5/8 inch hex head) RSIC-SI-CRC EZ to Steel: # 8 x 1inch minimum size fine thread ” screw. (Recommended #12 or #10 x 1inch hex head) ...
Page 3
At the perimeter, the distance between the wall and first support for the drywall shall be less than 8” Snap the 16 Ga cold rolled channel to the RSIC-SI-CRC EZ clip. This is a temporary connection to speed up installation. ...
Page 4
Caulk around the entire perimeter of the ceiling wall intersection. Use fire and smoke rated acoustical sealant where required. The RSIC-SI-CRC EZ is engineered for use with a minimum of 2 layers of 5/8” gypsum board. * RSIC OHD Adapter used for attaching directly to Concrete General Information: ...
Page 5
RSIC-DC04-SI RSIC-DC04-SI RSIC-DC04-SI RSIC-DC04-SI RSIC-DC04-SI PAC International, Inc. Tel: (866) 774-2100 Technical: (866) 649-2710 Web Site: www.pac-intl.com PAC International, LLC. All Rights Reserved. • (866) 774-2100 • Fax (866) 649-2710 RSIC® is a registered Trade Mark of PAC International, LLC.
Page 6
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. PAC International, Inc. Tel: (866) 774-2100 Technical: (866) 649-2710 Web Site: www.pac-intl.com PAC International, LLC. All Rights Reserved. • (866) 774-2100 • Fax (866) 649-2710 RSIC® is a registered Trade Mark of PAC International, LLC.
Need help?
Do you have a question about the RSIC-SI-CRC EZ and is the answer not in the manual?
Questions and answers