Download Print this page
PAC RP5-GM31 Manual

PAC RP5-GM31 Manual

Radiopro 5 radio replacement & steering wheel control interface with onstar retention for general motors vehicles

Advertisement

Introduction & Features
The RP5-GM31 interface allows the replacement of a factory radio in select General Motors vehicles with 29-bit LAN
radios. Using this interface will retain factory features such as OnStar, steering wheel controls (SWC), warning chimes,
interface also allows you to program two radio functions to each SWC button by using short press long press dual
command functionality. The RP5-GM31 also provides data bus driven outputs such as retained accessory power (RAP),
vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.
Important Notes
1.
interface into the vehicle (see next page for setting chart).
2.
3.
4.

Wiring Connection Chart

Aftermarket Radio Connections

Yellow
Black
Ground
Red
White
Front L + input
White / Black
Front L - input
Front R + input
Front R - input
Green
Rear L + input
Green / Black
Rear L - input
Purple
Rear R + input
Purple / Black
Rear R - input
Illustration / Schematic
Vehicle
Connections
P
ifi A
C
ti
Light Green
Pink
Blue
Blue / White
Orange / White
Purple/White
Brown Loop
Wiring
XM R
XM L
Connections
Radio Replacement & Steering Wheel Control Interface
with OnStar Retention for General Motors Vehicles
Parking Brake
Output (-)
Vehicle Speed
Output
Not Used
Illumination Output
(+)
Reverse Output (+)
Mute Loop - See
installation note 8.
Aftermarket
Radio
®
| Ph. 866-931-8021 | support@pac-audio.com
www.pac-audio.com
RP5-GM31

SWC Connector

Kenwood, Newer
Blue/Yellow
Clarion, Pioneer,
3.5mm Jack
Dual, Lightning
SWC Connection
SWC Connection
See above chart for
different radio type
connections
JVC
Rev. 022516
Page 1

Advertisement

loading

Summary of Contents for PAC RP5-GM31

  • Page 1 OnStar Retention for General Motors Vehicles Introduction & Features The RP5-GM31 interface allows the replacement of a factory radio in select General Motors vehicles with 29-bit LAN radios. Using this interface will retain factory features such as OnStar, steering wheel controls (SWC), warning chimes, interface also allows you to program two radio functions to each SWC button by using short press long press dual command functionality.
  • Page 2 Track - Voice Mute Mute Mute Mute Mute Mute Mute Preset + Preset/Disc - Disc/FM+ Band Preset + Preset + Audio Play/Pause Optional Steering Wheel Control Programming ® | Ph. 866-931-8021 | support@pac-audio.com Rev. 022516 www.pac-audio.com Page 2 ifi A...
  • Page 3 B. To program custom SWC assignments: Proceed to step 4 At this point you have two options: A. For short press functionality: B. For long press functionality: does not work, repeat the programming steps ® | Ph. 866-931-8021 | support@pac-audio.com Rev. 022516 www.pac-audio.com Page 3 ifi A...
  • Page 4 The OnStar® active LED will also turn on. When OnStar® disconnects, the radio will un-mute or will also activate Onstar®. chime module ® | Ph. 866-931-8021 | support@pac-audio.com Rev. 022516 www.pac-audio.com Page 4 ifi A...
  • Page 5 Volume Up Volume Down Moves back through the XM Press & release to channels recall a preset. Press & hold to store a preset. PLEASE NOTE ® | Ph. 866-931-8021 | support@pac-audio.com Rev. 022516 www.pac-audio.com Page 5 ifi A...
  • Page 6 2. Vehicles equipped with an overhead screen AND headrest monitors: audio level during an OnStar connection. on the side of the interface while original level. OnStar volume Product Updates (Firmware) ® | Ph. 866-931-8021 | support@pac-audio.com Rev. 022516 www.pac-audio.com Page 6 ifi A...