Table of Contents
Advertisement
Operating Instructions
The Outdoor Heater can be operated manually or using a remote control
(included).
Manual Mode
The Outdoor Heater has a Manual Control Button on the side of the Infrared
Receiver Module (See Parts List Diagram on page 6 and Fig. 5 below).
Fig. 5
When you press the Manual Control Button for the first time, the Outdoor Heater will
switch ON. The Outdoor Heater will switch ON at the power (Heating) level at which
it was last switched OFF. The number of illuminated LED Indicator Lights will indicate
the power (Heating) level at which the Outdoor Heater is operating.
If you want to change the power level or switch the Outdoor Heater OFF, keep
pressing the Manual Control Button to toggle through the different power levels till
all LEDs are off, at which stage the Outdoor Heater has switched OFF.
AFTER SALES SUPPORT AU
1300 777 137 NZ
0800 824 556
service@unclebills.com.au
15
Advertisement
Table of Contents
