Advertisement
Operating Instructions
NOTE: You may notice a slight odour being emitted from the Fan Heater during the
initial use. This is normal and the odour will cease with continued use.
Using the Heat Function
1.
Once the Fan Heater is ready to use, place it on a stable
flat surface. Avoid placing on plush or shaggy carpet.
Ensure the power dial is in O (Off) position.
2.
Insert the plug into a power outlet and turn the power
on.
3.
Turn the power dial (see Fig. 1) to the heater element
position.
4.
Turn the thermostat dial in a anticlockwise direction to the maximum
setting.
Thermostat Dial
To find a suitable thermostat setting for you, first set the dial
to the maximum position (see Fig 2). When the desired room
temperature has been reached, the thermostat dial should
be turned slowly in an anticlockwise direction until you hear
the thermostat "click" and the Fan Heater turns off.
After this, the Fan Heater will regulate and maintain the room
temperature, switching on when the room temperature drops
below the temperature setting, or switching off when the
temperature setting has been reached.
CAUTION: Never leave this Fan Heater unattended while it is switched on.
CAUTION: Never leave the Fan Heater on whilst sleeping.
CAUTION: Never hang clothing or manchester over the Fan Heater as it may cause
a fire.
WARNING: In order to avoid overheating, do not cover the heater.
08 AFTER SALES SUPPORT AU
1300 777 137 NZ
0800 824 556
Fig. 1
Fig. 2
service@unclebills.com.au
Advertisement
