Table of Contents
Advertisement
Assembly (cont)
3.
Install the adjustable angle mounting
brackets onto the nominated surface
(wall or ceiling) using appropriate fixing
screws suitable for the mounted surface
material and able to support more than
double the weight of the heater being
installed (weight of heater = 6.8kg). For
your convenience, expansion screws
have been provided (see fig. 3). Distance
between the two adjustable angle
mounting brackets should be same as
distance between the fixed mounting
brackets installed on the Outdoor Heater
in step 2.
NOTE: To determine the mounting position
of the heater, refer to 'Approximate Heating
Area' on page 8, 'Mounting Guide' on page
9, and 'Clearance Guide' on page 10.
4.
Mount the Outdoor Heater by
bolting the adjustable angle
mounting brackets (installed in
step 3) with the fixed mounting
brackets on heater (see Fig. 4).
NOTE: To determine the correct
mounting orientation and angle
of the Outdoor Heater, refer to
'Mounting Guide' on page 9 and
mounting angles below.
12
AFTER SALES SUPPORT AU
Fig. 3
Fig. 4
1300 777 137 NZ
0800 824 556
service@unclebills.com.au
Advertisement
Table of Contents
