Table of Contents
Advertisement
Operating Instructions (cont)
Press the 'Timer ON' button again and the minutes are now set (See Fig. 11.4).
Fig. 11.1
Fig. 11.2
The ON timer is now set and when the time reaches the time that has been set on
the timer, the heater will then switch on.
When the ON timer is set, the first LED light in the infrared receiver module will start
flashing green. Once the timer is triggered the LED light will illuminate to solid red.
Timer OFF Button
Use this feature to switch the heater OFF at a set time during the day.
Press the Timer OFF button,
can now be set.
Press the 'Timer OFF' button and the hour digits will flash. Press
to reach desired hour (See Fig 12.2).
Press the 'Timer OFF' button again and the hour is set causing the minute digits to
flash. Press
or
arrow button to reach desired minutes (See Fig 12.3).
Press the 'Timer OFF' button again and the minutes are now set (See Fig 12.4).
Fig. 12.1
Fig. 12.2
The OFF timer is now set and when the time reaches the time that has been set on
the timer, the heater will then switch OFF.
When the OFF timer is set, the first LED light in the infrared receiver module will start
flashing green. Once the timer is triggered the LED light will switch off.
18
AFTER SALES SUPPORT AU
Fig. 11.3
symbol with 'OFF' will show up (see Fig 12.1). The timer
Fig. 12.3
1300 777 137 NZ
0800 824 556
Fig. 11.4
or
arrow button
Fig. 12.4
service@unclebills.com.au
Advertisement
Table of Contents
