Table of Contents
Advertisement
Operating Instructions (cont)
Press the 'Clock' button again and the second digits will stop flashing and the time
is now set.
Fig. 8.1
Fig. 8.2
Fig. 8.3
Fig. 8.4
Heat Button
Press the Heat Button to adjust the heat level when the Outdoor Heater is ON.
The
symbol indicates that the Outdoor Heater is ON.
The
symbol indicates the heating level the Outdoor Heater is operating at. Each
bar indicates a different heating level. Refer to Fig. 9.
1 bar: 25%
2 bars: 50%
3 bars: 75%
4 bars: 100%
Fig. 9
Fig. 10
Fast Hot Button
Press the Fast Hot Button to turn ON/OFF Fast Hot Function. Fast Hot function
bypasses the current heat setting level and lets the heater run at FULL POWER for
few minutes to achieve rapid heating, after which it reverts to original heat setting
level. Refer to Fig. 10.
Timer ON Button
Use this feature to switch the Outdoor Heater ON at a set time during the day.
Press the Timer ON button,
symbol with 'ON' will show up (see Fig. 11.1). The timer
can now be set.
Press the 'Timer ON' button and the hour digits will flash. Press
or
arrow button
to reach desired hour (See Fig. 11.2).
Press the 'Timer ON' button again and the hour is set causing the minute digits to
flash. Press
or
arrow button to reach desired minutes (See Fig. 11.3).
AFTER SALES SUPPORT AU
1300 777 137 NZ
0800 824 556
service@unclebills.com.au
17
Advertisement
Table of Contents
