Technical Specifications - Graco G3 Instructions Manual

Technical Specifications

Technical Specifications
G3 Standard Automatic Lubrication Pump
Pump output pressure
Fill inlet pressure
Power
100 - 240 VAC
12 VDC
24 VDC
Outputs - Low Level (Dry Contact)
Contact rating
Switch rating
Switching current
Carry current
Fluid
Grease Models
Oil Models
Pumps
Pump Outlet
Reservoir Size
IP Rating
Ambient Temps
Noise (dBa)
Maximum sound pressure
Materials of Construction
Wetted Parts
All trademarks or registered trademarks are the property of their respective owners.
Pump Maximum Weight lb (kg)
Model With follower plate
2L 12.4 (5.6)
4L 15.3 (6.9)
8L 16.8 (7.6)
12L 18.4 (8.3)
16L 19.9 (9.0)
40
US
5100 psi
5000 psi
100 - 240 VAC; 0.8 A current, 90 VA Power, 47/63 Hz, Single phase,
inrush/locked rotor, max 40 A (1ms)
9 - 16 VDC; 5A current, 60 W, inrush/locked rotor 12 A
18 - 32 VDC; 2.5 A current, 60 W, inrush/locked rotor 6 A
10 W Maximum
30 VDC Maximum
0.5 A Maximum
1.2 A Maximum
Grease NLGI #000 - #2
At least 40 cSt oil
Up to 3
1/4-18 NPSF, Mates with 1/4-18 npt male fittings
2, 4, 8, 12, 16 Liters
IP69K
-40°F - 158°F
<70dBa
nylon 6/6 (PA), amorphous polyamide, T5004-060, zinc plated steel, carbon
steel, alloy steel, stainless steel, nitrile rubber (buna-N), bronze, nickel plated
alnico, chemically lubricated acetal, aluminum, PTFE
Without follower plate
11.4 (5.2)
13.1 (5.9)
14.6 (6.6)
16.1 (7.3)
17.6 (8.0)
Metric
35.1 MPa, 351.6 bar
34.4 MPa, 344.7 bar
-40°C - 70°C
With auto-fill shut off
N/A
17.9 (8.1)
19.7 (8.9)
21.6 (9.8)
23.4 (10.6)
332291P