Kenmore 795.71312.311 Service Manual page 52

https://appliancetechmanuals.com
12. ICE MAKER AND DISPENSER
ICE MAKER AND DISPENSER WORKING PRINCIPLES AND REPAIR
12-1 Operation Principle
Power Input
Initial Control
Icemaking
Control
Ice Ejection
Control
Water supply control
TEST Control
1. Turning the Icemaker stop switch off (O) stops the Icemaking function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the Icemaker control.
• Adjust Ejector to Start Position with power on.
•
operation.
• Check ice bucket is full of ice by rotating Feeler Arm motor in
normal and reverse direction and eject ice into the ice bucket if ice
bucket is not full.
• Performs Icemaking Mode after supplying water by operating the
SOLENOID in ICE VALVE.
•
seconds. The icemaking will run through 3 stages:
Feeler
Arm
Waits until water in the TRAY is frozen after Ice Maker starts
To operate LINE and SERVICE, press and hold the Fill Key for 3
→ →
Harvest Fill Icemaking.
Power
Switch