Honeywell 35 Series User Manual page 41



For example: Follow below step to stream out rtsp streaming.
1. Launch an RTSP player.
2. Choose File > Open URL. A URL dialog box will pop up.
3. Type the below URL command in the text box for each stream.
Mainstream: rtsp://192.168.0.108:554/live/1/1
Sub stream:
Third stream: rtsp://192.168.0.108:554/live/1/3
4. The live video will be displayed in your player.
RTSP port /RTP port for video / RTCP port for video:
• The RTP (Real-time Transport Protocol) is used to deliver video data to the clients. By
default, the RTP port for video is set to 555.
• RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By
default, the RTSP port number is set to 554.
• The RTCP (Real-time Transport Control Protocol) allows the camera to transmit the
data by monitoring the Internet traffic volume. By default, the RTCP port for video is
set to 556.
The ports can be changed to values between 1025 and 65535. The RTP port must be an
even number and the RTCP port is the RTP port number plus one, and thus is always an
odd number. When the RTP port changes, the RTCP port will change accordingly.
Multicast settings for streams: Click to display the detailed configuration information.
Multicast group address: Enter the Multicast group address.
Multicast video port: The ports can be changed to values between 1025 and 65535.
The default value is 25330.
Multicast audio port: The ports can be changed to values between 1025 and 65535.
The default value is 25430.
Multicast metadata port: The ports can be changed to values between 1025 and
65535. The default value is 25530
Multicast TTL: The multicast TTL (Time To Live) is the value that tells the router the
range a packet can be forwarded. The default value is 60.
Multicast is enabled by default in camera.
Note:
30
Camera ID: 1
Streaming ID: 1 for Mainstream, 2 for Sub stream, 3 for 3rd stream.
rtsp://192.168.0.108:554/live/1/2
Honeywell 35 Series IP Cameras User Guide