Rebooting The Camera; Restoring The Camera; Importing/Exporting Files - Honeywell 35 Series User Manual

the upgrade completes.
• If an SD card is used in your camera, it will be formatted automatically after the
upgrade. The formatting may take 5 to 20 minutes.
• After the SD card is formatted, it will be encrypted and its content cannot be read on
other cameras.
• If you want to use the SD card in another camera, format the SD card in another
camera first. For how to format the SD card, see
• A new SD card inserted to camera will also be formatted automatically after the
camera is upgraded.
• If the upgrade is successful, the "Reboot system now!! This connection will close"
message will be displayed. After that, re-access the camera. If an SD card is inserted
to the camera, wait for the SD card formatting to complete.

Rebooting the Camera

On this page, you can reboot the camera. It takes about one minute to complete. After it
is completed, the live video page will be displayed in your browser.
If the connection fails after rebooting, manually enter the IP address of the camera in
the address field to resume the connection.

Restoring the Camera

Restore the camera to factory default settings.
Network Setup: Check to retain the Network Type settings (see
General Settings
Daylight Saving Time: Check to retain the Daylight Saving Time settings (see

Importing/Exporting Files

Focus position: Check to retain the lens focus position using the previously saved
position parameters.
If none of the options is selected, all settings will be restored to factory default. Click
RESTORE and the camera will be rebooted.
After it is completed, the live video page will be displayed in your browser.
If the connection fails after rebooting, manually enter the IP address of the camera in
the address field to resume the connection.
Importing/Exporting Files
Export / Upload daylight saving time rules, custom language file, configuration file, and
server status report.
54
on page 27).
on page 54).
SD Card Format
Configuring Network
Honeywell 35 Series IP Cameras User Guide
on page 48.